Today, more than ever, you need reliable and easy to use products from a trusted partner who understands your sterilization needs. The Midmark M9 UltraClave® Automatic Sterilizer was specifically designed and engineered to meet those needs. The intuitive display and simple prompts help you easily select the cycle you need... whether it is for unwrapped items, pouches, packs or handpieces. Once the sterilization process is complete, the door conveniently opens automatically and quietly to dissipate the steam and provide fast and efficient drying time of your instruments.

Create peace of mind by making the healthcare market’s leading sterilizer... the Midmark M9 UltraClave... your preferred office choice.

Pouch Rack
1 pouch rack

Convenience at a glance.
The LCD display indicates cycle selected, cycle temperature and exposure time. When the cycle enters sterilization mode and dry mode, the remaining cycle time is displayed as well as temperature and pressure.

No more wet instruments.
Once the sterilization is complete, the door opens automatically and quietly to dissipate steam and dry your instruments. You’ll have dry, sterile instruments every time.

Safety features.
If the door is not closed completely or the reservoir water level is low, the LCD display will provide the appropriate message. In either case, sterilization can’t continue until you’ve attended to the unit.

Ease of draining & filling.
For ease of draining and filling, the Midmark M9’s reservoir fill port and drain tube is in the front of the unit, not on top or in back.

Optional printer accessory.
The Midmark M9 printer accessory provides a permanent record of cycles, times, temperatures and pressures during a cycle.

Self Program Controls
Programmable controls allow for creation of different cycle parameters for special sterilization needs. Programmable buttons allow you to change the following: Time (3 to 90 minutes), Temperature (230 to 275˚F), Dry Time (0 to 60 minutes), or Vent (slow or fast). The #1 and #2 buttons allow you to store the change if desired.

Pre-Programmed Controls
Four pre-programmed sterilization cycle controls: Unwrapped (132º C or 270º F for 3 minutes), Pouched (132º C or 270º F for 5 minutes), Packs (121º C or 250º F for 30 minutes), Handpiece (unwrapped and pouched) (132˚ C or 270˚ F for 6 minutes).

Midmark M9D AutoClave® Automatic Sterilizer
The Midmark M9D AutoClave® Automatic Sterilizer offers easy, effective sterilization but without the convenience of a door that opens automatically. One button starts the cycle... but at the end of the automatic sterilization process, you need to manually open the door within 30 minutes of completion to activate the dry cycle. This extra step is the only physical difference between the Midmark M9D and its automatic counterparts.

Specifications

Overall length w/plug: 20.13" (51 cm) Overall width: 15.3" (38.9 cm) Overall height w/printer: 15.8" (40.1 cm) Countertop area: 15.3" x 20.38" (38.9 cm x 51.8 cm) Chamber: 9" diameter (22.9 cm) 15" depth (38.0 cm) 3.5 gal. usable volume (13.4 liters) Trays: Two large – 7 5/16" W x 12" L x 7/8" D (18.6 cm x 30.5 cm x 2.2 cm) Two small – 5 5/8" W x 12" L x 7/8" D (14.3 cm x 30.5 cm x 2.2 cm) Unit weight: 73 lbs. (33.1 kg) Shipping weight: 81 lbs. (36.7 kg) Water reservoir capacity: 1.1 gal. (4.1 liters) Electrical Requirements 115 VAC, 50/60 Hz, 15 AMPS Single Phase 115 VAC has 1425-watt tubular immersion heater 230 VAC, 50/60 Hz, 10 AMPS Single Phase 230 VAC has 1500-watt tubular immersion heater UL61010A-1, UL61010A-2-041 CAN/CSA C22.2 No. 1010 CAN/CSA C22.2 No. 1010.2-041 96 A separate (dedicated) circuit is recommended for this sterilizer Meets the requirements of ASME Boiler and Pressure Vessel Code Optional Accessory 9A259001 - Impact Dot Matrix Printer 9A224001 - Sterilizer Deep Tray 9A226001 - Sterilizer Pouch Rack 9A307001 - Cool Hand Tool (Tray & Cassette Removal Tool) 9A260001 - External Condensing Tank Installation Use on Formica®, stainless steel or stone surface. Allow 2.5" (6.4 cm) on sides and rear and 12" (30.5 cm) above, to allow space to fill reservoir and for cooling processed trays.

ONE YEAR WARRANTY

UNIT IS BRAND NEW

LAST ONE IN STOCK

FREE SHIPPING IN THE CONTINENTAL USA